NEW DEVELOPMENTS

RESIN M NEW

Melamine resin with low free formaldehyde content. It is used in the reserve printing of fabrics that must subsequently be subjected to a dyeing process with direct or reactive dyes. The product prevents the print from being affected by the dye during the dyeing phase.

GOLD MINERPRINT GPA

Ready-to-use paste used for printing pearlescent gold-colored effects. Its formulation does not contemplate the presence of metal powders that cause pollution in the waste water and the prints are characterized by a practically zero release of formaldehyde. Sharp, well-defined and very bright printing effects are obtained with good fastness both to dry and wet rubbing and to washing.

MINERPRINT DARK PASTE

Ready-to-use paste used to increase the dyeing yield, creating a tone-on-tone effect. Where the product is printed, more intense tones are obtained than the dyed background. It is possible to cut the product with small percentages of water (max 20%), in order to reduce the darkening effect and thus obtain different shades of dye. In this case, the product can be brought back to normal viscosity parameters using CLEAR MINERPRINT MC. The product does not change the hand of the substrate in the slightest and is therefore recommended for printing on 100% cotton and other cellulosic fibers in general. Also compatible with most acid dyes, allowing them to be used even on wool and silk.

GOLD MINERPRINT GM

Ready-to-use paste used for printing brilliant gold-colored effects. Its formulation does not contemplate the presence of metal powders that cause pollution in the waste water and the prints are characterized by a practically zero release of formaldehyde. Sharp, well-defined and very bright printing effects are obtained with good fastness both to dry and wet rubbing and to washing.

DIAMOND MINERPRINT GM

Ready-to-use paste that provides printed fabrics with bright pearly white effects. Sharp, well-defined and very bright printing effects are obtained with good fastness to both dry and wet rubbing and washing. It can be pigmented giving bright and colorful effects.

MINERBOND SPF

Ready-to-use paste with excellent adhesive power, used for the transfer of mylar sheets on all natural or synthetic fiber fabrics. Printable using squares of max 55 threads / cm. Excellent definition of printing and detachment of the foil, excellent fastness to domestic washing and soft hand.